Reducer Model Description
Dimensions of the Reducer
| Solid shaft output mode | ||
| S(Shaft with key) | S1(Smooth ouput shaft) | T(Custom shaft) |
 |
|
According to customers |
1.Dimensions marked with * vary depending on the installed motor.
2.The input shaft diameter of model 85 is ≤24mm, and input with key is optional.
3.The output shaft diameter of model 85 is≤25mm.
Reduction Ratio
| Series | Single-stage | Dual-stage | Three-stage | ||||||||||||||||||||||
| Ratio | Recommended | 16 | 25 | 28 | 80 | 125 | 200 | 250 | |||||||||||||||||
| 3 | 4 | 5 | 7 | 10 | 12 | 15 | 20 | 35 | 40 | 50 | 70 | 60 | 100 | 140 | 175 | 280 | 350 | 400 | 500 | 700 | 1000 | ||||
| Not recommended | 30 | 100 | |||||||||||||||||||||||
| Norminal torque | Nm | 60.0 | 88.0 | 95.0 | 66.0 | 40.0 | 98.0 | 105.0 | 98.0 | 105.0 | 60.0 | 98.0 | 105.0 | 70.0 | 40.0 | 98.0 | 125.0 | 125.0 | 135.0 | 125.0 | 135.0 | 125.0 | 135.0 | 93.0 | 58.0 |
Reducer Parameters
+86-18664078178 
Email
